Global Leader in Hand Protection

As a licensee of both Dyneema® and DuPont® advanced fibers, our gloves and sleeves are made using proprietary engineered yarn blends and coatings. The result - hand and arm protection that is innovative and performance driven. Meeting todays tough ANSI and EN standards, we develop and market seamless knit, coated and uncoated, polymer, supported and unsupported as well as cut and sewn gloves in both leather and advanced composite materials.

SHOWING 1-36 OF 78 ITEMS
1 of 3

PIP®

Heavy Weight Aramid / Canvas Seamless Knit Hot Mill Mitt with Cotton Liner and Aluminum Fabric Back and Cuff - 14"

07-AG700

  • Liner Material: Aramid/ Canvas
  • Lining: Cotton
  • Weight: Heavy Weight
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: 均码
  • Packed: 60 Pair/Case
Kevlar Gloves - Uncoated

Kut Gard®

Seamless Knit DuPont™ Kevlar® Glove - Heavy Weight

07-K350

  • ANSI Cut Level: A3
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Heavy Weight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS - XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Kevlar with Crinkle Finish Latex

G-Tek® KEV™

Seamless Knit DuPont™ Kevlar® Glove with Latex Coated Crinkle Grip on Palm & Fingers

09-K1300

  • ANSI Cut Level: A4
  • Liner Material: Kevlar
  • Gauge: 7
  • Weight: Medium Weight
  • Coating: Latex
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3544D

EN 388 2016 Results: 3544DX

Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

CleanTeam®

Clean room nitrile gloves

100-333000BL

  • Polymer: Nitrile
  • Sizes: S-XL
  • Packed: 10 Bags/Case

Maximum Safety®

Mad Max™ II

120-4050

  • Impact Protection: Finger/ Thumb/ Back of Hand
  • Coating: PVC
  • Grip: Dot
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Goatskin

PIP®

Goatskin Leather Palm Glove with Leather Back and Kevlar® Blended Liner - Finger Impact Protection

120-4100

  • Hide: Top Grain Goatskin
  • Cuff: Slip-on
  • Construction: Cut-and-Sewn, Reinforced Thumb Crotch
  • Sizes: M-XXXL
  • Packed: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X33D

EN 388 2016 Results: 3X33DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Maximum Safety®

Torque™ Workman's Glove with Synthetic Leather Palm and Fabric Back - PVC / Silicone Grip

120-4500

  • Coating: Silicone
  • Coating Coverage: Palm & Fingers
  • Grip: Triangle
  • Cuff: Slip-on
  • Closure: Hook and Loop
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-150

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS - 3XL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42B

EN 388 2016 Results: 4X42BX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-319

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 144 Pair/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X41B

EN 388 2016 Results: 3X41BX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-330

  • ANSI Cut Level: A2
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4342B

EN 388 2016 Results: 4342BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

16-333

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42C

EN 388 2016 Results: 4X42CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor®

Hi-Vis Seamless Knit PolyKor® Blended Glove with Double-Dipped Nitrile Coated MicroSurface Grip on Palm & Fingers

16-340LG

  • ANSI Cut Level: A3
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4544C

EN 388 2016 Results: 4544CX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Nitrile Foam Grip

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-351

  • ANSI Cut Level: A5
  • Liner Material: HPPE/ PolyKor
  • Gauge: 21
  • Weight: Ultra Lightweight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-2XL
  • Packed: 12 Dozen/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42E

EN 388 2016 Results: 3X42E

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-368

  • ANSI Cut Level: A3
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X31C

EN 388 2016 Results: 4X31CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Neofoam Grip with PolyKor Fiber BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-377

  • ANSI Cut Level: A7
  • Liner Material: PolyKor X7
  • Gauge: 18
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A7
ANSI Cut Level: A7

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - 21 Gauge - Touchscreen Compatible

16-541

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 21
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch, Touchscreen Compatible
  • Sizes: XXS-XXL
  • Packed: 12 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X31D

EN 388 2016 Results: 3X31DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 1
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-560

  • ANSI Cut Level: A4
  • Liner Material: PolyKor
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43D

EN 388 2016 Results: 4X43DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 4

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

PIP®

丁腈光面防切割PolyKor纱线手套

16-756AP

  • Liner Material: PolyKor
  • Gauge: 13
  • Weight: Standard Weight
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4544

EN 388 2016 Results: 4544XX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Latex Grip with PolyKor Fiber

G-Tek® PolyKor®

Seamless Knit PolyKor® Blend Glove with Acrylic Lining and Double-Dip Latex MicroSurface Grip on Palm, Fingers & Knuckles

16-820

  • Liner Material: PolyKor
  • Lining: Acrylic
  • Coating: Latex
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S - XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X43D

EN 388 2016 Results: 3X43DX

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Cold: X2X

Convective Cold Resistance - X
Contact Cold Resistance - 2
Water Permeability - X

The EN 511 standard specifies the requirements and performance levels of work gloves against cold as low as -50°C. Protective devices against: convective cold, contact cold and water penetration. Convective and contact tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area. Water permeation is grade on a scale of 0 to 1 where 0 indicates “water penetration after 30 minutes” and 1 indicates “no water penetration after 30 minutes”.

Polyurethane Grip w/ PolyKor Fiber BEST SELLER

G-Tek® VR-X™

Seamless Knit PolyKor® Blended Glove with Polyurethane Advanced Barrier Coating Protection – Touchscreen Compatible

16-VRX380

  • ANSI Cut Level: A3
  • Liner Material: HPPE
  • Gauge: 18
  • Weight: Lightweight
  • Coating: Polyurethane
  • Coating Coverage: Full Hand
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X32C

EN 388 2016 Results: 4X32CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

PIP®

Seamless Knit PolyKor® Blended Glove ，no coated

17-218

  • Sizes: 均码
  • Packed: 144 Pair/Case
Cut Protection in Oily Environments

MaxiCut®

Seamless Knit Engineered Yarn Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers

18-570

  • ANSI Cut Level: A2
  • Liner Material: Engineered Yarn
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: XS - XXXL
  • Packed: 6 Dozen/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4331B

EN 388 2016 Results: 4331BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ECO Series CR Sustainable Fiber Gloves BEST SELLER

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D322

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond 2.0 Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-XXL
  • Packed: 6 Dozen/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ECO Series GP Sustainable Fiber Gloves

G-Tek® ECO Series™

Seamless Knit Recycled Yarn / Spandex Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

31-131R

  • Liner Material: Recycled Plastic
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Smooth
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case

3131

EN 388 2016 Results: 3131XX

Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ECO Series GP Sustainable Fiber Gloves

G-Tek® ECO Series™

Seamless Knit Recycled Yarn / Spandex Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

31-330R

  • Liner Material: Recycled Plastic
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121XX

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ECO Series GP Sustainable Fiber Gloves

G-Tek® ECO Series™

Seamless Knit Recycled Yarn / Spandex Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

31-530R

  • Liner Material: Recycled Plastic
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 10 Dozen/Case

4121

EN 388 2016 Results: 4121XX

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

G-Tek®

Seamless Knit Polyester Glove with Polyurethane Coated Flat Grip on Palm & Fingers

33-105

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-2XL
  • Packed: 144 Pair/Case

3121

EN 388 2016 Results: 3121X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 1

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Impact Series.

Nylon with Polyurethane Grip

G-Tek®

Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm & Fingers

33-125

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 25 Dozen/Case

4131

EN 388 2016 Results: 4131X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

G-Tek®

Seamless Knit Polyester Glove with Polyurethane Coated Flat Grip on Palm & Fingers

33-FG313/N

  • Liner Material: Polyester
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Grip: Flat
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 240 Pair/Case

4131

EN 388 2016 Results: 4131XX

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Nylon with Polyurethane Grip

G-Tek® VR-X™

Seamless Knit Nylon Glove with Polyurethane Advanced Barrier Protection Coating on Full Hand – Touchscreen Compatible

33-VRX180

  • Liner Material: Nylon
  • Gauge: 18
  • Coating: Polyurethane
  • Coating Coverage: Full Hand
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible, ESD Safe
  • Sizes: XS-XXL
  • Packed: 12 Dozen/Case

3111

EN 388 2016 Results: 3111XX

Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Puncture Level: 2

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ESD Safe

ESD is an acronym for electrostatic discharge. This discharge is the rapid transfer of static between two different objects. Although ESD doesn’t typically cause harm to the human body - you might only experience it as a small, surprising shock - it can cause extensive damage to electrical equipment and sensitive instruments. This damage may either be permanent, causing the device to malfunction (known as a catastrophic failure), or it may occur on a smaller scale that would be difficult to detect before the device is sent out for service (known as latent defect).

FENTANYL PROTECTION

Test Method: ASTM D6978-05

In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Nylon with Nitrile Grip

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

34-500

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroSurface
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: 2XS-2XL
  • Packed: 12 Dozen/Case

4121

EN 388 2016 Results: 4121XX

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-2
ANSI Abrasion Level: 2

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

G-Tek® NeoFoam®

Seamless Knit Nylon Glove with NeoFoam® Coated Palm & Fingers - Medium Duty

34-605

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Neofoam
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-XXL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Nylon with NeoFoam Grip

G-Tek® NeoFoam®

Seamless Knit Nylon Glove with NeoFoam® Coated Palm, Fingers & Knuckles - Medium Duty

34-608

  • Liner Material: Nylon
  • Gauge: 15
  • Coating: Neofoam
  • Coating Coverage: Palm, Fingers & Knuckles
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: S-2XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

G-Tek®

Seamless Knit Nylon Glove with Nitrile Coated Foam Grip on Palm & Fingers

34-810

  • Liner Material: Nylon
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: Foam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: S-XL
  • Packed: 480 Pair/Case

4121

EN 388 2016 Results: 4121XX

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

MaxiFlex Active-Ultralight Foam Nitrile

MaxiFlex® Active

Seamless Knit Nylon / Elastane Glove with Ultra Lightweight Nitrile Coated MicroFoam Grip on Palm & Fingers

34-8264

  • Liner Material: Lycra/ Elastane
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroFoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

MaxiFlex Nylon, Micro-Foam Nitrile

MaxiFlex® Endurance™

Seamless Knit Nylon Glove with Nitrile Coated MicroFoam Grip on Palm & Fingers - Micro Dot Palm - Touchscreen Compatible

34-844

  • Liner Material: Nylon/ Lycra
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Grip: MicroFoam
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Touchscreen Compatible
  • Sizes: XXS - XL
  • Packed: 12 Dozen/Case

4131

EN 388 2016 Results: 4131X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

SHOWING 1-36 OF 78 ITEMS
1 of 3
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.

PIP offers cut, chemical resistant, impact, disposable gloves and more

X

ORDER SAMPLE

X

GET FIELD TRIAL